Contact Information
United States Office
12352 Sycamore Ridge Ct.
San Diego, CA 92131
Tel. : 619-857-6872
Fax. : 858-467-0215
Mobile: (619)857-6872


SEMI-CONDUCTOR

Discrete

Transistor

General Purpose Transistor

TO-92

General Purpose Application. Low Noise Amplifier Application.

. High Voltage : VCEO=45V.
. For Complementary with PNP type BC307

 

SOT-23

General Purpose Application. Switching Application.

. Complementary to BC817.

 

TO-126

General Purpose Transistor.

. High Current : 1.5A (Max.)
. Low Voltage : 45V (Max.)
. DC Current Gain : hFE=40(Min.) @Ic=0.15A
. Complementary to BD136.

TO-92

General Purpose Application. Switching Application.

. Low Leakage Current : ICEX=10nA(max.) ; VCE=60V, VEB(off)=3V.
. Low Saturation Voltage: VCE(sat)=0.3V(max.) ; Ic=150mA, IB=15mA.
. Complementary to the KN2907.

 

 

Low VCE(sat) transistor

TSM

Low Frequency Power Amp, Converter Electronic Governor Applications

. Low Saturation Voltage. : VCE(sat)=0.3V(max.) at Ic=0.5A
. Complementary to KTC3531T.

 

 

TSM

DC-DC Converters Relay Drivers, Lamp Drivers, Motor Drivers, Strobes Application.

. Adoption of MBIT Processes.
. High Current Capacitance.
. Low Collector-to-Emitter saturation Voltage.
. High-Speed Switching.

TSM

Low Frequency Power Amp, Converter ElectronIC GoverNOR Applications

. Low Saturation Voltage. : VCE(sat)=0.3V(max.) at Ic=0.5A
. Complementary to KTA1531T.

TSM

DC-DC Converters Relay Drivers, Lamp Drivers, Motor Drivers, Strobes Application.

. Adoption of MBIT Processes.
. High Current Capacitance.
. Low Collector-to-Emitter saturation Voltage.
. High-Speed Switching.

 

Low Noise Transitor

SOT-23

General Purpose Application. Switching Application.

. SOT-23 Package

 

TO-92

Low Noise Amplifier Application. High Voltage Application.

. Low Noise.: NF=3dB(typ.), Rg=100ohm , VCE=-6V, Ic=-100mA, f=1kHz
. High DC Current Gain : hFE=200¡­700.
. High Voltage : VCEO=-120V.

SOT-23

Low Noise Amplifier Application.

. High Voltage : VCEO=120V.
. Excellent hFE Linearity : hFE(0.1mA)/hFE(2mA)=0.95(typ.).
. High hFE : hFE=200¡­700.
. Low Noise : NF=1dB(typ.), 10dB(max.).
. Complementary to KTA1517S.

 

USM

Low Noise Amplifier Application.

. High hFE : hFE=600~3600.
. Noise Figure : 0.5dB(typ.) at f=100Hz.

 

High Voltage Transistor

TO-92

General Purpose Application.High Voltage Application.

. High Collector Breakdwon Voltage: VCBO=-130V, VCEO=-120V
. Low Leakage Current: ICBO=-100nA(max.)
. Low saturation Voltage: VCE(sat)=-0.5V(max.)
. Low Noise : NF=8dB (max.)

 

SOT-23

General Purpose Application.High Voltage Application.

. High Collector Breakdwon Voltage: VCBO=-160V, VCEO=-150V
. Low Leakage Current: ICBO=-50nA(max.)
. Low saturation Voltage: VCE(sat)=-0.5V(max.)
. Low Noise : NF=8dB (max.)

TO-92L

High Voltage Application.

. Complementary to KTC1027.

 

TO-92L

High Voltage Application. Color TV Class B Sound Output Application

. High Voltage : VCEO=180V.
. High DC Current Gain.

 

 

Switching Transistor

TO-92

General Purpose Application.Switching Application.

. Low Leakage Current : ICEX=50nA(max.), IBL=50nA(max.)
. Excellent DC Current Gain Linearity.
. Low saturation Voltage: VCE(sat)=0.3V(max.)
. Low Collector Output Capacitance : Cob=4pF(max.)
. Complementary to 2N3906.

 

TO-92L

Power Amplifier Applications. Power Switching Applications.

. Low Collector Saturation Voltage : VCE(sat)=-0.5V(max.) (Ic=-1A)
. High Speed Switching Time : tstg=1.0 S(typ.)
. Complementary to KTC3209.

 

TO-126

Power Amplifier Application. Power Switching Application.

. Low Collector Saturation Voltage : VCE(sat)=-0.5V(max.) (Ic=-1A)
. High Speed Switching Time : Tstg=1us(typ.)
. Complementary to KTC2814.

 

TO-92L

Voltage Regulators, Relay Drivers Lamp Drivers, Electrical Equipment

. Adoption of MBIT Processes.
. Low Collector-to-Emitter Saturation Voltage.
. Fast Switching Speed.
. Large Current Capacity and Wide ASO.
. Complementary to KTD1347.

 

 

FETs

 

Small Signal Junction Field Effect Transistor

TO-92M

Condenser Microphone Application.

. Especially Suited for Use in Audio, Telephone.
. Capacitor Microphones.
. Excellent Voltage characteristics.
. Excellent Transient characteristics.

SOT-23

Condenser Microphone Application.

. Especially Suited for Use in Audio, Telephone.
. Capacitor Microphones.
. Excellent Voltage characteristics.
. Excellent Transient characteristics.

 

USM

Condenser Microphone Application.

. Especially Suited for Use in Audio, Telephone.
. Capacitor Microphones.
. Excellent Voltage characteristics.
. Excellent Transient characteristics.

 

SMOS FETs

TO-92

Interface And Switching Application.

. High density cell design for low RDS(ON).
. Voltage controlled small signal switch.
. Rugged and reliable.
. High saturation current capablity.

 

SOT-23

Interface and Switching Application.

. High density cell design for low RDS(ON).
. Voltage controlled small signal switch.
. Rugged and reliable.
. High saturation current capablity.

 

SOT-23

Ultra-High Speed Switching Applications Analog Switch Applications

. 2.5 Gate Drive.
. Low Threshold Voltage : VTH=0.5¡­1.5V.
. High Speed.
. Small Package.
. Enhancement-Mode.

USM

Ultra-High Speed Switching Applications Analog Switch Applications

. 2.5 Gate Drive.
. Low Threshold Voltage : Vth=0.5~1.5V.
. High Speed.
. Small Package

 

 

Low Voltage MOSFETs

FLP-8(MOSFET)

General Description
It s mainly suitable for battery pack or power
management in cell phone, and PDA.

. VDSS=-20V,  ID=-10A.
. Drain-Source ON Resistance.
    : RDS(ON)=14m§Ù(Max.) @VGS=-4.5V, ID=-10A.
    : RDS(ON)=24m§Ù(Max.) @VGS=-2.5V, ID=-7.6A.

TSOP-6(MOSFET)

General Description
It s mainly suitable for use as a load switch
in battery powered applications.

. VDSS=-20V,  ID=-2.0A.
. Drain-Source ON Resistance.
     : RDS(ON)=130m§Ù(Max.) @ VGS=-4.5V.
     : RDS(ON)=190m§Ù(Max.) @ VGS=-2.5V.

 

FLP-8(MOSFET)

 

General Description
Switching regulator and DC-DC Converter applications.
It s mainly suitable for power management in PC,
portable equipment and battery powered systems.

. VDSS=30V,  ID=12A.
. Low Drain-Source ON Resistance.
     : RDS(ON)=7m§Ù(Max.) @ VGS=10V
     : RDS(ON)=11m§Ù(Max.) @ VGS=4.5V
. Super High Dense Cell Design.
. High Power and Current Handling Capability.

TSSOP-8(MOSFET)

General Description
Switching regulator and DC-DC Converter applications.
It s mainly suitable for Li-ion battery pack.

. VDSS=20V,  ID=7A.
. Low Drain-Source ON Resistance.
     : RDS(ON)=20m§Ù(Max.) @ VGS=4.0V
     : RDS(ON)=28m§Ù(Max.) @ VGS=2.5V
. ESD Protection.
. Super High Dense Cell Design.

 

High Voltage MOSFETs

TO-220IS

KHB011N40F1
General Description
This planar stripe MOSFET has better characteristics, such as fast
switching time, low on resistance, low gate charge and excellent
avalanche characteristics. It is mainly suitable for electronic ballast
and switching mode power supplies.

. VDSS=400V, ID=10.5A
. Drain-Source ON Resistance : RDS(ON)=0.53§Ù  @VGS=10V
. Qg(typ.)=32.5nC

 

TO-220IS

KHB3D0N90F1
General Description
This planar stripe MOSFET has better characteristics,
such as fast switching time, low on resistance, low gate charge
and excellent avalanche characteristics. It is mainly suitable for
electronic ballast and switch mode power supplies.

. VDSS= 900V,  ID= 3A
. Drain-Source ON Resistance
      : RDS(ON)=4.5§Ù  @VGS = 10V
. Qg(typ.) = 25nC

TO-220IS

KHB7D0N65F1
General Description
This planar stripe MOSFET has better characteristics, such as fast
switching time, low on resistance, low gate charge and excellent
avalanche characteristics. It is mainly suitable for active power factor
correction and switching mode power supplies.

. VDSS=650V,  ID=7A
. Drain-Source ON Resistance
    : RDS(ON)=1.4§Ù  @VGS =10V
. Qg(typ.)= 32nC

TO-220IS

KHB9D0N90F1
General Description
This planar stripe MOSFET has better characteristics,
such as fast switching time, low on resistance, low gate charge
and excellent avalanche characteristics. It is mainly suitable for
electronic ballast and switching mode power supplies.

. VDSS(Min.)= 900V,  ID= 9A
. Drain-Source ON Resistance 
     : RDS(ON)=1.4 §Ù  @VGS =10V
. Qg(typ.) =75nC

 

Diode

 Small signal switching diode

USM

KDS120

Ultra High Speed Switching Application.

. Low Forward Voltage : VF=0.92V (typ.).
. Fast Reverse Recovery Time : trr=1.6nS(typ.).
. Small Total Capacitance : CT=2.2pF (typ.).
. Small Package : USM.

TES6

KDS126E

Ultra High Speed Switching Application.

. Low forward voltage : VF=0.9V(Typ.)
. Fast reverse recovery time : trr=1.6ns(Typ.)
. Small total capacitance : CT=0.9pF(Typ.)

TFSC

KDS160F

ULTRA HIGH SPEED SWITCHING APPLICATION.

. Small package : TFSC.
. Low forward voltage.
. Fast reverse recovery time.
. Small total capacitance.

SOT-23

KDS190

Ultra High Speed Switching Application.

. Low Forward Voltag : VF=0.92V(typ.).
. Fast Reverse Recovery Time : trr=1.6nS(typ.).
. Small Total Capacitance : CT=2.2pF (typ.).
. Small Package : SOT-23.

 

Zener Diode

USC

KDZ100V

Constant Voltage Regulation Application.

 Reference Voltage Application. Wave Form Clipper.

. Sharp Breakdown Characteristic.
. Small Package : USC

ESC

KDZ15EV

Constant Voltage Regulation Application. Reference Voltage Application.

. Nominal Voltage Tolerance About +/- 6%.
. Small Package : ESC

ESC

KDZ2.4EV

Constant Voltage Regulation Application. Reference Voltage Application.

. Nominal Voltage Tolerance About +/- 6%.
. Small Package : ESC

USC

KDZ27V

Constant Voltage Regulation Application. Reference Voltage Application.

. Nominal Voltage Tolerance About +/- 6%.
. Small Package : USC

 

General Purpose Rectifier

SMA(1)

GN1G
Surface Mount Glass Passivated Rectifier.

. Plastic package has Underwriters Laboratory flammability 
  Classification 94V-0.
. For surface mounted aplications.
. Low profile package.
. Built-in strain relief, ideal for automated placement.
. Glass passivated chip junction.
. High temperature soldering guaranteed 
  : 250¡É/10 seconds at terminals.

 

 

Bridge Diode

DF

DF06
Single-Phase Bridge Rectifiers.

. Plastic package has Underwriters Laboratory
  flammability Classification 94V-0.
. Glass passivated chip junction.
. High surge overload rating : 50A peak.
. Ideal for printed circuit boards.
. High temperature soldering guaranteed
   : 260¡É/10 seconds, at 2.3kg tension.

DFS

DF06S
Single-Phase Bridge Rectifiers.

. Plastic package has Underwriters Laboratory
  flammability Classification 94V-0.
. Glass passivated chip junction.
. High surge overload rating : 50A peak.
. Ideal for printed circuit boards.
. High temperature soldering guaranteed
    : 260¡É/10 seconds, at 2.3kg tension.

GBJ(5S)

GBJ6J
Single-Phase Bridge Rectifier

. Ideal for printed circuit boards.
. Low forward voltage drop, high current capability.
. The Plastic material has Underwriters Laboratory
  Flammability Classification 94V-0.
. Rating to 600V PRV.

KBJ(3S)

KBJ4J
Single-Phase Bridge Rectifier.

. Surge overload rating-150 Amperes peak.
. Ideal for printed circuit boards.
. Plastic material has Underwriters Laboratory
  Flammability Classification 94V-0.
. Mounting Position : Any.

 

Integrated Circuit

OP Amp.

FLP-14

KIA324F
Quad Operational Amplifier

. In the Linear Mode the Input Common Mode
  Voltage Range Includes Ground.
. Four Internally Compensated Op Amps are in
  Single Package.
. Low Power Dissipation and Power Drain Suitable for
  Battery Operation.
. Differential Input Voltage Range Equal to the
  Power Supply Voltage.

DIP-14

KIA324P
Quad Operational Amplifier

. In the Linear Mode the Input Common Mode
  Voltage Range Includes Ground.
. Four Internally Compensated Op Amps are in
  Single Package.
. Low Power Dissipation and Power Drain Suitable for
  Battery Operation.
. Differential Input Voltage Range Equal to the
  Power Supply Voltage.

FLP-8

KIA4559F
Dual Low Noise Operational Amplifier

. Wide Band Decompensated (AV 20dB)
. Pin 1 and Pin 9 of Lead Frame was Each Other Connected
. Wide Band Range : fT=5MHz (typ.)

TSV

KIA75S558F
Single Low Noise Operational Amplifier

. Internal Frequency Compensation type.
. Wide Band Range : fT=3MHz(typ.)
. Suitable Application for ACtive Filter and Equalizer Amplifier.

 

Comparator

FLP-14

KIA339F
Quad Voltage Comparators

. Single Supply Voltage Range or Dual Supplies: 2VDC to 36VDC or +/-18VDC
. Low Supply Current : 0.8mA (typ.)
. Low Input offset Voltage : +/-2mV (typ.)
. Wide Input Common Mode Voltage Range: 0VDC to Vcc-1.5VDC

 

DIP-14

KIA339P
Quad Voltage Comparators

. >Single >Supply >Voltage >Range or Dual Supplies: 2VDC to 36VDC
  or +/-18VDC
. Low Supply Current : 0.8mA (typ.)
. Low Input offset Voltage : +/-2mV (typ.)
. Wide Input >Common >Mode >Voltage >Range: 0VDC to
  Vcc-1.5VDC

US8

KIA393FK
Dual Comparator

. Be Possible to Operate at the Wide Range Singleor Two Supply Voltage.
. Low Supply Current : Icc=0.8mA(typ.).
. Low Input offset Voltage : VIO=2mV(typ.).
. Wide Common Mode Input Voltage : 0VDC to Vcc-1.5VDC.

TSV

KIA75S393F
Single Comparator

. Be Possible to Operate at the Wide Range Singleor Two
  Supply Voltage.:2~36V
. Low Supply Current : Icc=0.4mA(typ.).
. Low Input offset Voltage : VIO=2mV(typ.)
. Wide Common Mode Input Voltage : 0VDC to Vcc-1.5VDC.

 

Voltage Stabilizer

TO-92

KIA2431AP

Programmable Precision References

. Programmable Output Voltage to 16 Volts.

TSM

KIA2431AS

Programmable Precision References

. Programmable Output Voltage to 16 Volts.

TSV

KIA2431AT

Programmable Precision References

. Programmable Output Voltage to 16 Volts.

TO-92

KIA431A

Programmable Precision References

 

Voltage Regulator/ Positive/ 0.15A/ 0.5A/ 1A/ 1A(Adjustable)

DPAK

KIA317F
3-Terminal 1A Positive Adjustable Regulator

. Adjustable output between 1.25V and 37V
. Guaranteed 1.5A output current
. Line regulation typically 0.001%/V
. Load regulation typically 0.1%
. 80dB ripple rejection (with Cadj)
. Internal thermal overload protection
. Internal short-circuit current limiting
. Output transistor safe-area compensation

TO-220IS

KIA7809API

Three Terminal Positive Voltage Regulators

TO-220IS

KIA7820API

Three Terminal Positive Voltage Regulators

TO-92L

KIA78L09BP

Three Terminal Positive Voltage Regulators

. Suitable for C-MOS, TTL, DTL, HTL Power Supply.
. Internal Short-Circuit Current Limiting.
. Internal Thermal Overload Protection.

 

Transistor Array & Interface Driver

FLP-16

KID65001AF

7 Circuit Darlington Transistor Array

. Output Current : 500mA max.
. High Sustaining Voltage Outputs : 50V min.
. Output Clamp Diodes
. Inputs Compatible with Various types of Logic.

FLP-20

KID65084AF

8 High-Voltage High-Current Darlington Transistor Arrays

. Output Current (Single Output) : 500mA max.
. High Sustaining Voltage Outputs : 50V min.
. Output Clamp Diodes
. Inputs Compatible with Various types of Logic.

FLP-16

KID65501F

Single Driver

. Output Current : 200mA max.
. High Voltage Outputs : 35V
. Input Compatible with Various types of Logic

FLP-16

KID65507F

Single Driver

. Output Current : 200mA max.
. High Voltage Outputs : 35V
. Input Compatible with Various types of Logic

 

Power Supply Controller

DIP-8

KIA34063A

DC/DC Converter Controller

. Operation From 3.0V to 40V Input.
. Low Standby Current.
. Current Limiting.
. Output Switch Current to 1.5A.

FLP-14

KIA3842F

High Performance Current Mode Controller

. Trimmed Oscillator Discharge Current for Precise duty Cycle Control.
. Current Mode Operation to 500kHz.
. Automatic Feed Forward Compensation.
. Latching PWM for Cycle-By-Cycle Current Limiting.

FLP-16

KIA494AF

Voltage-Mode PWM Controller IC

. Completed PWM Power Control Circuitry.
. Uncommitted Outputs for 200mA Sink or Source Current.
. Output Control Selects Single-Ended or Push-Pull Operation.
. Internal Circuitry Prohibits Double Pulse at Either Output.

DIP-16

KIA494AP

Voltage-Mode PWM Controller IC

. Completed PWM Power Control Circuitry.
. Uncommitted Outputs for 200mA Sink or Source Current.
. Output Control Selects Single-Ended or Push-Pull Operation.
. Internal Circuitry Prohibits Double Pulse at Either Output.

 

Logic MOS

USV

KIC7S00FU

2-Input NAND Gate

. High Speed : tpd=7nS(typ.) at Vcc=5V.

USV

KIC7S04FU

Inverter

. High Speed : tpd=7nS(typ.) at Vcc=5V.

USV

KIC7S14FU

Schmitt Inverter

. High Speed : tpd=11nS(typ.) at Vcc=5V.

 

Saw Filter

Filter Wireless Data Communication System

SC-33

KF939U

Band pass filters for RF circuits of wireless data communication.

. High stability and reliability with good performance
  and no adjustment.
. Wide and sharp pass band characteristics.
. Low insertion loss and deep stop band attenuation for interference.

SC-44

KF939V

Band pass filters for RF circuits of wireless data communication.

. High stability and reliability with good performance
  and no adjustment.
. Wide and sharp pass band characteristics.
. Low insertion loss and deep stop band attenuation for interference.

 

Transceiver

SC-44

KF410BV

Band pass filters for 400MHz¡­500MHz Band.

. High stability and reliability with good performance
  and no adjustment.
. Wide and sharp pass band characteristics.
. Low insertion loss and deep stop band attenuation for interference.
. Terminating Impedance : 150§Ù//0pF

SC-44

KF422V

 

Band pass filters for the receiving RF circuits of transceiver

. High stability and reliability with good performance
  and no adjustment.
. Wide and sharp pass band characteristics.
. Low insertion loss and deep stop band attenuation for interference.

SC-44

KF426BV

Band pass filters for 400MHz¡­500MHz Band.

. High stability and reliability with good performance
  and no adjustment.
. Wide and sharp pass band characteristics.
. Low insertion loss and deep stop band attenuation for interference.
. Terminating Impedance : 150§Ù//0pF

SC-44

KF477V

Band pass filters for the receiving RF circuits of transceiver.

. High stability and reliability with good performance
  and no adjustment.
. Wide and sharp pass band characteristics.
. Low insertion loss and deep stop band attenuation for interference.




 

 

 

 
 
copyright © TCP America, Inc All rights reserved